Hebei Friend International Business Trade Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Wang Anna
  • Company Name : Hebei Friend International Business Trade Co., Ltd.
  • Tel : 0086-311-89949639
  • Fax : 0086-311-87628016
  • Address : Hebei,Shijiazhuang,Room1603,Unit 3,Building 1,Han Lin Fu Di,Youlin Street,Qiaoxi District of Shijiazhuang,Hebei,CN
  • Country/Region : China
  • Zip : 050000

Cable making equipment copper wire making machine with annealing

Cable making equipment copper wire making machine with annealing
Product Detailed
Cable making equipment copper wire making machine with annealing 1.inlet dia: 8.0mmoutlet dia:1.5mm 2.speed:25m/s 3.13 years

Cable making equipment copper wire making machine with annealing

LHD-11Dies  automatic copper wire drawing machine with online annealing (factory)

specification:

Model

Suitable

 Material

Drawing

Die 

Inletwire

Diameter

 (mm)

Outletwire

 Diameter 

 Rang (mm)

Line

 Speed 

(m/s)

Capstan 

Diameter

Main 

Motor 

Power 

(kw) 

 Machine 

Dimension

(m)

The

Highest 

Yield (kg/h)

 Machine

Weight

(kg)

JD-450type

 heavya copper wire drawing machine

AL

11

8.0

1.5-4.0mm

22m/s

450

250kw

13*3*

3.5

1000kg

About

28T

Take-up Configurations 

Double take up machine

Main capability characteristic :

Features: 

1.The drawing blocks rank in a horizontal row.And the cantilevers of all dies' holders are very short and in equal length.

2.The surface of drawing blocks is coated with tungsten carbide power. Which is strong in hardness and wear proof , having long life span.

3.Main drawing machine and dead -block are driven separately. And all dies can be changed conveniently and easily .

4.Continuous dual take up , automatic reel -change,the automatic reel -change can be done at more than 99% efficiency.

5. Driven by British Euro-DC converter,the imported PLC and touch screen .(Siemens or preface ,which is convenient for the operator to set and display the parameter on the touch screen )The bearing adopts Sweden

Electrical appliance using the German Schneider

Annealing machine :

1) structure: Horizontal

2) annealing: AC three section type

3): host drive through belt transmission

4) annealing maximum current:5000A

5) annealing maximum voltage:50V

6) annealing wheel diameter ( nominal diameter ):Φ 450mm

7) annealing rim material: cold rolled nickel belt

8) the intermediate idler pulley with LY12spray the surface of ceramic

9) consumption of compressed air: about 300L/min pressure over 0.8Mpa

10) heat exchanger in cooling water consumption: about 250L/min temperature is not higher than25 degrees

11) cooling water pump model: 80-65-160

12) heat exchanger (20 square meters )

13) bearing using NSK products

Double take-up machine:

structural characteristics:

A ) model into ring machine in structure more reasonable, in the drum and the rotary table does not occur between the wire clamping phenomenon;

B ) into ring machine drum spraying tungsten carbide wear-resistant materials

C ) using planetary belt wheel and a drum rotation, the wire frame deformation prevention requirements significantly;

D ) rolled off the claw elastic adopts pneumatic control

E ) wire line storage capacity

F) The pneumatic top of shaft Pneumatic lift

        

Copper rod breakdown machine production line scene photograph

Cable making equipment copper wire making machine with annealing



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.